KOZI Baywin Pellet Burner

KOZI BayWin Pellet Stove



Highly efficient, environmentally friendly, and competitively priced, the KOZI Model BayWin Pellet Burner is the most popular alternative heating source on the market today.

Loaded with state-of-the-art features, this pellet burner will provide many years of trouble free heating comfort.  The attractive design guarantees it will fit into any decor. 

Each appliance is equipped with many safety features such as; Circulation Fan Override Switch, High Temperature Sensors, and an Exhaust Sensor.  Our MX Control Light Module Monitoring System, standard on all pellet stoves, acts as a trouble shooting guide.  At a glance, this diagnostic system will relay the operating status of your unit to ensure your safety and peace of mind. 

The KOZI BayWin Pellet Burner is available as a freestanding stove or a fireplace insert. 
The Electric Start Kit is standard on all KOZI model BayWin Pellet Stoves
 

MX Digital Control Board Features:


  • 3 standard operational modes "Manual", "Hi-Low" and "Auto"
  • Wall Thermostat capable
  • Adjustable fuel feed from 1 lb to 4.5 lbs per hour  (454 grams to 2 kgs)
  • Simple fully automatic push button start-up system
  • Automatic safety shut-off when the unit runs out of fuel
  • Automatic shut down in the event of any system malfunction
  • Heat exchanger blower senses amount of heat and adjusts blower speed accordingly
  • Simplified control circuit is easy to maintain and inexpensive to repair
  • A unique diagnostic light module makes it easy to monitor system functions
  •  
     

    The Heater:


  • 10 tube heat exchanger 
  • Advanced glass saver door screen - reduces cleaning frequency    
  • 50 lb. (22 kg) feed hopper easily converts to a 100 lb. (45.5 kg) capacity with the optional hopper extension (Available on freestanding units only) 
  • Large capacity and removable ash reservoir reduces cleaning frequency (Available on freestanding units only)
  • Top loading fuel feeding system separates the burn chamber from the fuel storage compartment thus reducing the risk of any "burn-back" 
  • Negative pressure burn chamber prevents spillage of smoke and fumes into the house
  • Manual draft control allows easy adjustment for various fuel and draft conditions  
  • Variable speed heat exchanger blower 
  • Unique "bouncing flame" heater design 
  • Effective air wash system keeps glass door clean longer
  • Tested and Certified for safety, efficiency, and performance by Warnock Hersey
  • Certified for residential and mobile home installations in Canada and the U.S.A.
  • Insert models Certified for masonry insert and factory built zero-clearance fireplace installation 

  • Body Construction:


     
  • All visible corners and edges are finished to reinforce safety and accent appearance of the unit
  • Heavy duty, full hearth extension
  • Heavy block steel 24K gold-plated door 
  • Ceramic safety glass rated For 1400 ° F (760 °C)
  • Full width interior ash lip to reduce spillage when the door is opened 
  • Aluminized steel interior heat shield and stainless steel burn pot resists heat and corrosion
  • Scraper-type heat exchanger cleaner and removable top heat shield 
  •    Specifications:



    Stove Insert
    WIDTH 25" / 625 mm 25" / 625 mm
    DEPTH 25" / 625 mm 25" / 625 mm
    HEIGHT 31" / 775 mm 23" / 585 mm
    WEIGHT 225 lb. / 103 kg 200 lb. / 90 kg
    FUEL CAPACITY 50 lb. / 22 kg 40 lb. / 18 kg
    MOBILE HOME APPROVED APPROVED
    BURN TIME 11 to 50 hours 9 to 40 hours
    INPUT/HR* 40,000 BTU 40,000 BTU
    FLUE DIAMETER 3" / 75 mm 3" / 75 mm

    *INPUT MAY VARY WITH THE QUALITY OF FUEL
     

    Fireplace Opening Requirements:



    WIDTH MIN 23" MAX 40"
    HEIGHT MIN 19.5" MAX 31"
    DEPTH MIN 16"
    HEARTH REQUIREMENT MIN 11"
    CLEARANCE TO COMBUSTIBLES

    TO BACKWALL 1" / 25 mm
    TO CORNERS 1" / 25 mm
    TO SIDEWALL (BAYWIN) 12" / 300 mm
    TO SIDEWALL (XL) 5" / 125 mm
    TO MANTLE 13" / 330 mm
    ALCOVE MAX. DEPTH 30" / 762 mm
    ALCOVE MIN. WIDTH 48" / 1220 mm
    ALCOVE MIN. HEIGHT 48" / 1220 mm
    FLOOR PROTECTOR 6" / 150 mm
    ELECTRICAL REQUIREMENT 115 Volt / 3 amp
    WITH SELF IGNITER 115 Volt / 6 amp
    EPA STATUS EXEMPT
    TESTING AND LISTED BY WARNOCK HERSEY


    Manufactured By:
    APR Industries Ltd.
    1354 Waverley Street
    Winnipeg, MB R3T 0P5
    CANADA
    PH: (204) 452-9907
    Fax: (204) 453-2747
    E-mail: mail@kozistoves.com

    |Home ||Pellet Stoves ||Wood Stoves ||Battery Backup System ||Download ||FAQ ||Parts ||Contact Us |


    Thank you for visiting www.kozistoves.com